Cette page contient des modifications qui ne sont pas marquées pour la traduction.
The Climatec Ecoline is the first to use winMulti as the control software. This document is to record the issues raised by the transfer of the parameters and functions from one to another.
The Climatec Ecoline is the first to use winMulti as the control software. This document is to record the issues raised by the transfer of the parameters and functions from one to another.
No plunging on Ecoline, so normal mnd files would create a problem when moving Y, Z and R together. Front end now overcomes this by automatically shifting the tooling command in front of the Y and Z move. Back end will wait for R axis idle on a tool command.
DRAINS not possible
Spindle on / off not controlled by tooling command
Tool off returns Y and Z to safe position for rotation
Safe rotation position now added as a PEP for each profile.
All mnd files must have pl= and pl=- commands
The tooling sequence is now as follows.
Bar starts with y and Z in safe position during loading
Tool command selects spindle and rotates, wait for R idle
Move Y and Z as per ma.y and ma.z in mnd file, wait for idle
Mnd file plunge
operation commands
Mnd file plunge minus
Tool off command returns Y and Z to safe position for profile
V Notching
V notch mnd files VECO and WECO
uses xOffset.I and .Seperation for x positions
Using parameters from ecoline, VI around 544, seperation 138
V axis zero pos assumed to be backfence =129mm movetoafter=120