Connecting To Yaskawa with Silex USB
Difficulté
Moyen
Durée
10 minute(s)
Sommaire
- 1 Introduction
- 2 What is the Silex DS-510?
- 3 Étape 1 - Connect to mains
- 4 Étape 2 - Install SX Virtual Link
- 5 Étape 3 - Run software
- 6 Étape 4 - Connect
- 7 Étape 5 - Run Yaskawa DriveWizard
- 8 Étape 6 - Find COM Port
- 9 Étape 7 - Enter into the communications setup
- 10 Étape 8 - Click on Modify link
- 11 Étape 9 - Enter COM port
- 12 Étape 10 - Connect to drive
- 13 Commentaires
Introduction
What is the Silex DS-510?
The Silex unit is a USB server, allowing a PC to have a USB port anywhere over an ethernet network. This is useful to connect the PC to a Yaskawa inverter when they are located in different cabinets.
The software sets up a virtual USB port which can then be used to run the Yaskawa DriveWorks software.Étape 1 - Connect to mains
Connect the Silex to mains, onto the network via RJ45 and via USB to the Yaskawa
Étape 2 - Install SX Virtual Link
Install SX Virtual Link software on your PC, download here. Keep all defaults during install
Étape 3 - Run software
Power on and run the software
Étape 4 - Connect
Double click the Yaskawa or click on the button at the bottom to connect
Étape 5 - Run Yaskawa DriveWizard
Run Yaskawa DriveWizard (installation file is in Dropbox (Stuga Machinery Ltd)\service\3rd Party Manuals\Inverters\Yaskawa)
Étape 6 - Find COM Port
Find the COM Port that has been assigned to the Yaskawa by looking in Windows Device Manager (type in your search box, or through control panel)
Étape 7 - Enter into the communications setup
Enter this into the communications setup on DriveWizard
Étape 8 - Click on Modify link
Click on Modify link
Étape 9 - Enter COM port
Enter the COM port in the drop down box
Étape 10 - Connect to drive
Click connect to drive
Draft
Français
English
Deutsch
Español
Italiano
Português