TB0407 Replacing Infeed Belt with Joined Belt

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 9/03/2020 par Gareth Green en cours de rédaction

The infeed belts on Flowlines and Ecolines require the disassembly of the infeed tables to replace the belts. Jointed belts will now be supplied when replacement required. These belts are cut and use threaded pins to join the ends into a continuous belt.

Procedure

  1. Cut off belt to be replaced
  2. Feed replacement belt over pulleys and pull ends together
TB0407 Replacing Infeed Belt with Joined Belt Image01.png











3. Insert pins into holes in belt. Use a pin chuck in drill or small tap wrench to screw pins through.


TB0407 Replacing Infeed Belt with Joined Belt Image.png










4.    When pins are fully inserted cut and file pins to leave a smooth edge


TB0407 Replacing Infeed Belt with Joined Belt Image00.png










5.    Tension belt as normal.


Tools Required

·        Small Tap Wrench or Pin Chuck

·        Hacksaw or cutting disc

·        File

Commentaires

Draft