B0000025 B0001175 Belt Identification

Guide to correct identification of appropriate Saw blade motor drive belts

Difficulté

Easy Facile

Durée

5 minute(s) minute(s)

Saw, Blade, belts, Motor, pulley Saw_Motor_Drive_Belt_Identification_Guide_Screenshot_2025-02-06_134808.png

Introduction

A Guide to correctly identify the variant of drive belt required for ZX5, ZX4 ,ZX3 S-65 and Flowline saw modules

Belts will vary across blade sizes and Pully diameters

Key indicator is pulley size, over blade size

Étape 1 - Pulley Size

Pulley size must be measured to determine the correct belt size for the machine

There are 2 sizes of pulley that may be fitted

A tape measure will be adequate for taking a measurement

Étape 2 - How to measure

Simply use the tape measure to take measurement over the indicated area, don't be too fussy, as the difference in pulley sizes is very noticeable

Étape 3 - Results

<translate>Use your measurements below to calculate the correct Stuga Part number required for replacement belts

Pulley 1 Dia	Pulley 2 Dia	Part Number
84mm	104mm	B0000025
84mm	84mm	B0001175
104mm	104mm	Contact Stuga

en none 0 Draft