R0019264 Autoflow Mk 4,1 Infeed Table Safe moving equipment guide

Information for use of R0019264 kit for safe moving of Autoflow Mk4.1 Infeed Table

R0019264_Autoflow_Mk_4_1_Infeed_Safe_moving_equipment_Screenshot_2025-03-10_120252.png

Summary

The Autoflow Mk4.1 Infeed Gripper Frame is a tall, unstable module that is difficult to unload and prone to toppling. A set of bolt-on arms have been designed to allow safe and stable loading, unloading and positioning of the module.

This document describes the safe configuration of these assemblies and the configurations in which they should be used.

Activity	Configuration	Position	Wheels Needed?	Picture
Loading / unloading from lorry	1	High	No
Positioning in factory	2	Low	No
Barrowing or "threading" through narrow doorway / path	2	Low	Yes

...D0016506 non slip pads must be used on both faces where shown , in all configurations. Failure to do so may result in unsafe lifting or product damage

Two configurations of channel are possible from supplied parts within kit R0019264

Configuration One

Components	Fasteners

Configuration Two

Components		Wheels

High Lift Point

Low Lifting Point

Advised for frame positioning with Fork truck or pallet truck using Configuration One

Barrow Position

This configuration enables a forklift or pallet truck to lift one end and push the module along a narrow path or through a narrow opening.

en none 0

Draft