R0015297 Mount V Notch Datum Rollers

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 12/03/2024 par Gareth Green en cours de rédaction

Introduction

Tools Required


Standard hex key set


Parts Required


R0015038 Bench Assemble V notch Datum Rollers

Étape 1 - Unless otherwise stated

Use locktite 243 on all fasteners

Use loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised



Étape 2 - Mount Mid roller Assembly

Fit mid roller assembly as shown . Do not use adhesive at this stage .


Secure with 2 off M6 x 25 socket caps


Ensure indicated face is butted correctly

Étape 3 - Attach rear frame

Attach frame to rear as shown , secure with 6 off M10 x 30 socket caps and a form washers

Fit 8 off M8 x 12 flat bottom grubscrews as indicated


Do not use adhesive at this point


Check orientation as shown


Étape 4 - Attach roller assembly

Attach Roller assembly as shown , using 2 off M6 x 50 socket caps and A form washers


Do not use adhesive at this point


Commentaires

Draft