R0015095 Bench Assemble Infeed Support Arms

Instructions to bench assemble infeed support arms

Difficulté

Medium Moyen

Durée

5 hour(s) heure(s)

R0015095_Bench_Assemble_Infeed_Support_Arms_Screenshot_2023-07-17_140203.png

Introduction

Tools Required

Standard hex key set

Standard tap sete

Setting jigs

Parts required

B0001170 Spacer 180 off

B0001155 open rail 18 off

D0015553 Transfer Support arm R/H (right to left machine ) OR D0015552 Transfer Support Arm L/H ( Left to Right machine)

D0015554 x 18

M8 x 20 button hex fastener x 18

M5 x 25 socket cap x 180

M5 A form washer x 180

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Étape 2 - Hand of parts issued determines handing.

Steps shown below will show location and position of parts and procedure for fitting , not orientation

Étape 3 - Clean all threads

Étape 4 - Align spacers and fit setting jigs

1 Mount 4 off setting jigs to arm on the indicated points

2 align 20 off spacers over all m5 holes

Étape 5 - Fix Rail to arm

1 Use M5 x 25 socket cap and A form washer with loctite 243 to fix rail to arm

2 Ensure rail touching setting jig as indicated and two rails are pushed completely together

en none 0 Draft