R0011092 Kit - Autoflow SR Axis Blower and Journal Scraper

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 12/08/2022 par Gareth Green en cours de rédaction

Pas encore d'image

Details of kit to prevent swarf blockage on hepco ring on Autoflow SR axis

Problem

With the Autoflow SR Axis bearing system change to a hepco rail system, issues have occurred due to swarf blockage.

Solution

A system has been designed to combat the issue in 2 ways; Blowers to pevent swarf build up and scrapers to keep the journals clear of swarf

Blowers

The blowers will run from a new valve to be installed on the saw turret

  1. FIt Valve
  2. Cable valve output to Fieldbus box
  3. Run blue 6mm pipe to Port 1 from a tee into nearest supply to a valve bank. This may necessitate the pipe running through the SR axis caterpillar trunking
  4. Run blower output from port 4.
  5. Spilt the blower output into 4 using the tees
  6. Each of 4 blower tees will end in a copper pipe that should blow the area under the SR cover
Copper Blower 1.png


Scrapers


R0011092 Kit - Autoflow SR Axis Blower and Journal Scraper Image 4.png


R0011092 Kit - Autoflow SR Axis Blower and Journal Scraper Image 5.png


Commentaires

Draft