R000559 Bench assemble machined parts

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 6/11/2023 par Gareth Green en cours de rédaction

Preparation for machining

Introduction

Tools Required


standard hex key set


Parts Required

D0004142 Backfence Support Bar x 2

D0004598 Backfence Bar Support x 1

Étape 1 - Unless otherwise stated

All bolts to have Loctite 243 adhesive applied unless otherwise stated

All Threaded Pneumatic connections to have Loctite 570 applied

All bolts to be pen marked once adhesive applied and correct tension added



Étape 2 - Assemble

Quality check bars for size, flatness and burrs.


Check fit or arms into mounting bar. Arms must be a good fit into mounting bar, but not tight. Inspect parts if loose or tight fit is observed


Assemble D0004142 Backfence Support Bar x 2

and D0004598 Backfence Bar Support x 1 as shown


Use 4 off M8 x 40 socket caps to fix

Étape 3 - Check

Check the indicated area for correct fitment


There should be no gap present , check with feeler gauges


Tolerance 0.002"/0.05mm

Étape 4 - Pass to machine shop

Pass to machine shop for alignment machining


Indicated faces required skimming to be true to each other


Commentaires

Draft