Case Study - Saw Jamming due to Y Notch at End Of Bar Offcut Length

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 12/09/2022 par Gareth Green en cours de rédaction

Case study of profile jamming due to Y notch at the end of the bar

Problem

The saw blade is jamming on the final offcut on the bar - in particular on a Y notch or arrow head

Video Samples
Machine Description Link
Z079 Andrew Wright Arrow head at end https://vimeo.com/748839932/9567816fbe
Z083 Window Warehouse Y notch at end https://vimeo.com/748839996/aacfaa8034

Solution

The AW and WW videos are different, in theat one is an arrow head and WW is a Y notch. However, they are similar because the problem happens after the first cut of a 2 cut sequence. This is another layer of complexity away from a minable cut.

On WW I think the problem would be solved by changing the gaps file so that the Y notch only wasted 40mm.


This is the original gaps file


gaps  | SQ  \ MI  < AH  / IM  e ES  s mSQ m mMI a mAH i mIM f YF  r YR (Lead)
| SQ  k     j+v   w+j   j+v   t     k     j+v   w+j   j+v   k     k
\ MI  j+v   j+v   w+j   j+v   t     j+v   j+v   w+j+v j+v   j+v   j+v
> AH  k+x   j+v   j     j+v   t     k+x   j+v  	j     j+v   k+x   k+x
/ IM  j+v   j+v   w+j+v j+v   t     j+v   j+v   w+j+v j+v   j+v   j+v
e ES  40    40    40    40    0     s     s     s     s     s     s
s mSQ k     j+v   w+j   j+v   e     k     j+v   w+j   j+v   40    40
m mMI j+v   j+v   w+j   j+v   e     j+v   j+v   w+j+v j+v   j+v   j+v
a mAH k+x   j+v   j     j+v   e     k+x   j+v  	j     j+v   k+x   k+x
i mIM j+v   j+v   w+j+v j+v   e     j+v   j+v   w+j+v j+v   j+v   j+v
f YF  k     j+v   w+j   j+v   40    k     j+v   w+j   j+v   k+x   f
r YR  k     j+v   w+j   j+v   40    k     j+v   w+j   j+v   f     k+x
for version 6.63
09/02/15 Updated to s+s for Y notches at start. Stops issue with Xhold
30/07/15 Updated for correct gaps on YF and YR at start and end of bar
12/09/17 ZX5 type - can do Y notches at end of bar
11/10/17 Grip end 20mm for gripper system; E< 100 for saw handover
13/11/17 Y notch at end treated like arrow head


the 40 and 40 have been put in the wrong place - should be on the "e ES" line


gaps  | SQ  \ MI  < AH  / IM  e ES  s mSQ m mMI a mAH i mIM f YF  r YR (Lead)
| SQ  k     j+v   w+j   j+v   t     k     j+v   w+j   j+v   k     k
\ MI  j+v   j+v   w+j   j+v   t     j+v   j+v   w+j+v j+v   j+v   j+v
> AH  k+x   j+v   j     j+v   t     k+x   j+v  	j     j+v   k+x   k+x
/ IM  j+v   j+v   w+j+v j+v   t     j+v   j+v   w+j+v j+v   j+v   j+v
e ES  40    40    40    40    0     s     s     s     s     40    40
s mSQ k     j+v   w+j   j+v   e     k     j+v   w+j   j+v   k     k
m mMI j+v   j+v   w+j   j+v   e     j+v   j+v   w+j+v j+v   j+v   j+v
a mAH k+x   j+v   j     j+v   e     k+x   j+v  	j     j+v   k+x   k+x
i mIM j+v   j+v   w+j+v j+v   e     j+v   j+v   w+j+v j+v   j+v   j+v
f YF  k     j+v   w+j   j+v   40    k     j+v   w+j   j+v   k+x   f
r YR  k     j+v   w+j   j+v   40    k     j+v   w+j   j+v   f     k+x
for version 6.63
09/02/15 Updated to s+s for Y notches at start. Stops issue with Xhold
30/07/15 Updated for correct gaps on YF and YR at start and end of bar
12/09/17 ZX5 type - can do Y notches at end of bar
11/10/17 Grip end 20mm for gripper system; E< 100 for saw handover
13/11/17 Y notch at end treated like arrow head
12/09/22 Y notch at end bug - should be one line above


Thi is not the end of the story, though. The problem will reoccur if there is an operation in the minable zone, forcing the minable.

To make things really complicated, the system cannot have both a Y notch and a minable together. The Y notch takes precident.



In summary,.

1. There is not a silver bullet solution to this

2. All gaps.saw files to Z088 are wrong for Y notch at the end of a bar.

3. There will be a problem with a minable and arrow head at the end of the bar

4. Install the latest gaps file if this problem is relevant

Commentaires

Draft