ZX5 - Specialised Settings for Eaton DE Drives

Auteur avatarGareth Green | Dernière modification 25/01/2023 par Gareth Green en cours de rédaction

This page lays out the settings needed for each individual Eaton drive on a ZX5 or Autoflow Mk4. It is important to use these settings to stop slim profiles toppling over on the transfer table

ZX5 Motors

Infeed motor - Module A

  • Accel = 0.1s
  • Decel = 0.1s

Crank C - Module C

  • Accel = 0.5s
  • Decel = 0.1s

Crank D - Module C

  • Accel = 1.0s
  • Decel = 0.2s

Crank E - Module E

  • Accel = 0.5s
  • Decel = 0.1s


Crank E - Module E

  • Accel = 0.5s
  • Decel = 0.1s

Autoflow Mk4 Parameters

Infeed motor - Module A

  • Accel = 0.5s
  • Decel = 0.5s

Commentaires

Draft