WEG Inverter Setup : Différence entre versions

[version en cours de rédaction][version en cours de rédaction]
 
Ligne 19 : Ligne 19 :
 
{{AddComments}}
 
{{AddComments}}
 
{{Tuto Status
 
{{Tuto Status
−
|Complete=Draft
+
|Complete=Published
 
}}
 
}}

Version actuelle datée du 20 décembre 2023 à 12:04

How to set up the WEG inverters. used on the Transfer crank and Infeed modules. These are fitted to some ZX5 machines in the field replacing the Eaton Inverters for a short period.

Auteur avatarStuga Engineer | Dernière modification 20/12/2023 par Stuga Engineer en cours de rédaction


How to set up the WEG inverters. used on the Transfer crank and Infeed modules. These are fitted to some ZX5 machines in the field replacing the Eaton Inverters for a short period.

WEG Inverter Setup WEG.JPG


WEG Inverter Setup Basic setting params.JPG

Accel and Decel will also need to be set. The values to be set for each axis are below.

P100= Accel

P101= Decel


WEG Inverter Setup Capture.jpg


Commentaires

Published

Récupérée de « https://stuga.dokit.app/w/index.php?title=WEG_Inverter_Setup&oldid=13138 »
© 2017 - 2024 Dokit, SAS.