This module guides the engineer on how to correctly adjust the centralising mechanism on Stuga saws. The engineer will need a reasonable mechanical knowledge, and a working knowledge of the operation of the machine.
Difficulté
Difficile
Durée
2 heure(s)
Sommaire
Introduction
When in arrow head or centralising mode, the pivot point of the saw blade is moved from the bladetofence position to the central position of the current section. The mechanism that achieves this allows for any width of profile from 45 mm to 130 mm. If the arrow head position is not central to the profile, the centraliser position may need to be adjusted
Étape 1 -
Draft
Français
English
Deutsch
Español
Italiano
Português