| [version en cours de rédaction] | [version en cours de rédaction] |
| Ligne 8 : | Ligne 8 : | ||
}} | }} | ||
{{Introduction | {{Introduction | ||
| − | |Introduction=<translate>== Problem == | + | |Introduction=<translate>==Problem== |
On Z063 the bolt holding the saw blade onto the spindle has regularly been loosening during use. | On Z063 the bolt holding the saw blade onto the spindle has regularly been loosening during use. | ||
| − | == Solution == | + | ==Solution== |
The M16 bolt will be replaced with a stud and castle nut that can be locked with a cotter pin. | The M16 bolt will be replaced with a stud and castle nut that can be locked with a cotter pin. | ||
| − | == Tool List == | + | ==Tool List== |
Drill with Ø5.0 bit | Drill with Ø5.0 bit | ||
24mm Spanner | 24mm Spanner | ||
| − | C Spanner</translate> | + | C Spanner |
| + | |||
| + | = Parts List = | ||
| + | {| class="wikitable" width="748" border="1" cellpadding="8" cellspacing="0" | ||
| + | | width="76" |D0004031B | ||
| + | | width="319" |Saw Washer 3mm | ||
| + | | width="302" |1 | ||
| + | |- valign="TOP" | ||
| + | | width="76" |D0015560 | ||
| + | | width="319" |Spindle Stud | ||
| + | | width="302" |1 | ||
| + | |- valign="TOP" | ||
| + | | width="76" |F0000273 | ||
| + | | width="319" |Spirol Pin Ø6 x 30 | ||
| + | | width="302" |1 | ||
| + | |- valign="TOP" | ||
| + | | width="76" |F0000549 | ||
| + | | width="319" |Split Pin 4mm x 32 | ||
| + | | width="302" |1 | ||
| + | |- valign="TOP" | ||
| + | | width="76" |F0000550 | ||
| + | | width="319" |Castle Nut M16x1.5 | ||
| + | | width="302" |1 | ||
| + | |}</translate> | ||
| + | }} | ||
| + | {{Materials | ||
| + | |ItemList={{ItemList | ||
| + | |Item=Spanner 24mm | ||
| + | }} | ||
}} | }} | ||
| − | |||
{{EPI}} | {{EPI}} | ||
{{Tuto Step | {{Tuto Step | ||
| Ligne 63 : | Ligne 90 : | ||
|Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_08.jpg | |Step_Picture_00=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_08.jpg | ||
|Step_Picture_01=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_09.jpg | |Step_Picture_01=TB0415_Method_to_Prevent_Loosening_of_Saw_Blade_0415_09.jpg | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
}} | }} | ||
{{Notes}} | {{Notes}} | ||
Version actuelle datée du 23 mars 2020 à 20:28
Method to Prevent Loosening of Saw Blade
Difficulté
Moyen
Durée
30 minute(s)
Sommaire
- 1 Introduction
- 2 Problem
- 3 Solution
- 4 Tool List
- 5 Parts List
- 5.1 Pièces et outils
- 5.2 Étape 1 - Remove bolt, washer, blade and blade flanges
- 5.3 Étape 2 - Fit Spindle Stud
- 5.4 Étape 3 - Drill Ø5 hole through shaft and stud for roll pin
- 5.5 Étape 4 - Insert roll pin to lock stud in position
- 5.6 Étape 5 - Re-fit blade and blade flanges
- 5.7 Étape 6 - Fit Washer
- 5.8 Étape 7 - Fit Castle Nut
- 5.9 Étape 8 - Install Cotter Pin
- 5.10 Commentaires
Introduction
Problem
On Z063 the bolt holding the saw blade onto the spindle has regularly been loosening during use.
Solution
The M16 bolt will be replaced with a stud and castle nut that can be locked with a cotter pin.
Tool List
Drill with Ø5.0 bit
24mm Spanner
C Spanner
Parts List
| D0004031B | Saw Washer 3mm | 1 |
| D0015560 | Spindle Stud | 1 |
| F0000273 | Spirol Pin Ø6 x 30 | 1 |
| F0000549 | Split Pin 4mm x 32 | 1 |
| F0000550 | Castle Nut M16x1.5 | 1 |
- Pièces et outils
Pièces et outils
Spanner 24mm 
Open ended spanner 24mm
Étape 1 - Remove bolt, washer, blade and blade flanges
Étape 2 - Fit Spindle Stud
Étape 3 - Drill Ø5 hole through shaft and stud for roll pin
Position on shaft not important.
Étape 4 - Insert roll pin to lock stud in position
Étape 5 - Re-fit blade and blade flanges
Étape 6 - Fit Washer
Align flats on washer to ensure holes for pin spanner are clear.
Étape 7 - Fit Castle Nut
Étape 8 - Install Cotter Pin
Ensure pin is secure and cannot be dislodged during normal operation.
Draft
Français
English
Deutsch
Español
Italiano
Português