[version en cours de rédaction] | [version en cours de rédaction] |
(2 révisions intermédiaires par le même utilisateur non affichées) | |||
Ligne 82 : | Ligne 82 : | ||
# Slot the SSD into the spare SATA socket on the motherboard | # Slot the SSD into the spare SATA socket on the motherboard | ||
{{Pin|...the caddy sits on top of the motherboard – its not attached except for the SATA/SATA power socket}}<br /></translate> | {{Pin|...the caddy sits on top of the motherboard – its not attached except for the SATA/SATA power socket}}<br /></translate> | ||
+ | }} | ||
+ | {{Tuto Step | ||
+ | |Step_Title=<translate>Add the VGA Video Card</translate> | ||
+ | |Step_Content=<translate>*To remove the dummy metal bracket, insert a flat-head screwdriver in the hole of the bracket. Push the bracket to release the bracket, and then lift the bracket out from the system. | ||
+ | *Insert the optional I/O module (Type-C/HDMI/VGA/DP/Serial) into its slot from the inside of your computer. | ||
+ | *Connect the I/O cable to the connector on the system board. | ||
+ | *Replace the two (M3X3 or M2x5) screws to secure the optional I/O module to the system. | ||
+ | |||
+ | <br /></translate> | ||
+ | |Step_Picture_00=Setting_Up_C0000422-KIT_-_Full_Hardware_2023_VGA_Install.JPG | ||
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
Ligne 147 : | Ligne 157 : | ||
{{Tuto Step | {{Tuto Step | ||
|Step_Title=<translate>Setup Hyper-V and Virtual machine</translate> | |Step_Title=<translate>Setup Hyper-V and Virtual machine</translate> | ||
− | |Step_Content=<translate># In Windows, launch '''Hyper-V Manager''' | + | |Step_Content=<translate>#In Windows, launch '''Hyper-V Manager''' |
− | # Create a new Hyper-V virtual machine via the Wizard. | + | #Create a new Hyper-V virtual machine via the Wizard. |
− | # Before you begin: '''Next''' | + | #Before you begin: '''Next''' |
− | # Virtual Machine Name: “''' | + | #Virtual Machine Name: “'''StugaVM”''' |
− | # Store the Virtual machine in a different location: | + | #Store the Virtual machine in a different location: [:Fichier:///D:/ '''D:\'''] |
− | # Generation: '''2''' ''(Do not select 1)'' | + | #Generation: '''2''' ''(Do not select 1)'' |
− | # Assign memory: Startup memory = '''8192, Use dynamic memory''' ''(The RAM we added earlier)'' | + | #Assign memory: Startup memory = '''8192, Use dynamic memory''' ''(The RAM we added earlier)'' |
− | # Network connection: '''Stuga Switch''' | + | #Network connection: '''Stuga Switch''' |
− | # Connect virtual hard disk: '''Use Existing Disk, Browse, Select VMPC.VHDX from above.''' | + | #Connect virtual hard disk: '''Use Existing Disk, Browse, Select VMPC.VHDX from above.''' |
− | # Finish the Wizard. | + | #Finish the Wizard. |
− | # Go to settings on the new ''' | + | #Go to settings on the new '''StugaVM''' virtual machine |
− | ## '''CheckPoints''' → '''Disable checkpoints''' | + | ##'''CheckPoints''' → '''Disable checkpoints''' |
− | ## '''Integration Services → Enable all checkboxes''' | + | ##'''Integration Services → Enable all checkboxes''' |
− | ## '''OK.'''</translate> | + | ##'''OK.'''</translate> |
}} | }} | ||
{{Tuto Step | {{Tuto Step | ||
Ligne 166 : | Ligne 176 : | ||
|Step_Content=<translate>In '''Hyper-v Manager''' | |Step_Content=<translate>In '''Hyper-v Manager''' | ||
− | # Start the virtual PC ''' | + | #Start the virtual PC '''StugaVM''' ''(RMB, start or from the menu to right hand side)'' |
− | # Double click its icon to launch '''Virtual Machine connection''' | + | #Double click its icon to launch '''Virtual Machine connection''' |
− | # '''These instructions are for the VIRTUAL MACHINE (not the host)''' | + | #'''These instructions are for the VIRTUAL MACHINE (not the host)''' |
− | ## '''Activate Windows''' and use the product code from the Windows license in the PC box. ''(Type “Activation Settings”'' from start menu search. | + | ##'''Activate Windows''' and use the product code from the Windows license in the PC box. ''(Type “Activation Settings”'' from start menu search. |
− | ## '''Launch windows update''' and check everything is up to date. </translate> | + | ##'''Launch windows update''' and check everything is up to date. </translate> |
}} | }} | ||
{{Tuto Step | {{Tuto Step |
Creating the C0000422-KIT from the hardware components ready for stores
Auteur Gareth Green | Dernière modification 14/02/2024 par Stuga Engineer en cours de rédaction ⧼frevu-button-review-label⧽
Creating the C0000422-KIT from the hardware components ready for stores
Dell_Optiplex_3080.jpg
This process takes the components to create a standard "C000422-KIT".
This kit can then be stored and pulled off the shelf when required. It will then need to be set up for the particular customer machine using Setting Up Windows PC C0000422-KIT 2023
On Monday spreadsheet: IT Stock Asset Tracking
Remove the PC from the Dell box with power adapter and power cable. Keyboard and mouse (if supplied) can be returned to stores (not needed here)
(it slides forward)
In Hyper-v Manager
en none 0 Draft
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #