Setting Ultrasonic Sensor - Vertical

Auteur avatarGareth Green | Dernière modification 31/03/2020 par Gareth Green en cours de rédaction

Introduction

How to set up an ultrasonic sensor when it is mounted vertically. This is normally the case on ZX5 machines on the "Mod_Clear" functions near the rollers.


Video d'introduction

Utiliser la passerelle

Étape 1 - Ensure there is 30mm clearance from sensor to profile

If the sensor is closer than 30mm, it will not work



Étape 2 - Press button with profile in place

Hold button in until yellow and green lights flash, let go



Étape 3 - Press Button with profile removed

This sets the longest range of the sensor.

Hold until flashing stops



Étape 4 - Check that it works

Light will come on when object is detected



Commentaires

Draft