R0015286B Bench Assemble X axis Energy Chain

Assembly details for X axis energy chain

Difficulté

Medium Moyen

Durée

0.5 hour(s) heure(s)

R0015286B_Bench_Assemble_X_axis_Energy_Chain_Screenshot_2023-08-18_092205.png

Introduction

Tools Required

Small flat screwdriver

Identification markers

Parts Required

A0001112 Energy Chain Separator: 2500 Chain x 20

A0001113 Energy Chain: Series 2500.03 55mm Bend Radius x 4.2 meter

A0001114 Energy Chain Bracket Set: 24/2500 Plastic, Pivoting x 1

E0000439 Connector Brad Harrison M8 3 pole 10 m lead pvc x 2

E0001237 Pre Made Cable :Beckoff Extension AM8032 9.0m x 1

Étape 1 - Count links

Total links of for A0001113 Energy Chain is 95

Double check correct quantity

Étape 2 - Assemble links and reverse 2 off

1 Assemble 111 links together , ensure all links are orientated the same way .

2 Identify the female end of the assembled links

3 Fit 2 more links of A0001113, but fit in a reversed orientation

Étape 3 - Attach mounting brackets

Attach mounting brackets A0001114

1 Attach male bracket to reversed links and orientated as shown

2 Attach female bracket to opposite end orientated as shown

Étape 4 - Fit separators

1 Open all links of trunking using a small flat screwdriver to release

2 Fit A0001112 Energy Chain Separator to the following positions

Start From reversed link end , fit 2 separators to first reversed link next to male bracket

3 Counting from the first separators fitted, fit additional separators to every tenth link

4 This is correct

Étape 5 - Fit E0000439 Cables

Add identification markers to 2 off E0000439 cables

X291

X294

Fit cables to energy chain in section 1 as shown. Plugs should exit energy chain at the male bracket / reversed link end . Leave 1 meter of cable to exit from plug end

Étape 6 - Fit E0001237 servo cable

Use Cable E0001237 Pre Made Cable :Beckoff Extension AM8032 9.0m x 1 and identify as 'SX'

Fit to section 2 and leave Female plug and 0.5meter of cable to exit energy chain at the male bracket / reversed link end

Étape 7 - Fit air pipes

Cut 3 0ff lengths of 6mm black air pipe at 9 meters

Add identification as follows

2419

1311

1319

Fit to section 3 and leave 1 meter of pipe exiting the energy chain at the male bracket / reversed link end

en none 0 Draft