Outfeed Support Roller - Flowline

Auteur avatarStuga Engineer | Dernière modification 17/07/2020 par Stuga Engineer en cours de rédaction

Part code R0010276 - Extra support roller upgrade added to replace single roller on outfeed rear clamp.

Sommaire

A primary reason for this upgrade is to avoid the single roller falling into the gap of a wide V notch. It also gives better support when clamping profile on the outfeed of the MultiHead.


Images below show the single roller:

Outfeed Support Roller - Flowline Roller 1.jpg
Outfeed Support Roller - Flowline Roller 2.jpg


Below are images of the Double fitted roller :

Outfeed Support Roller - Flowline Big-IMG 4860.jpg


Outfeed Support Roller - Flowline Large-IMG 4859.jpg


Commentaires

Draft