Sommaire

1 Symptom
2 Potential Solutions

TwinCAT, connection, plc, data

Symptom

On initialisation, the blue Stuga screen is trying to connect and the tries number keeps counting up.

Generally, this indicates a problem with the route between the front end and back end PC

...First thing to try is a simple full power off and on again

Potential Solutions

Back end PC not switched on

Customer Network

If connected network on either front and back end PCs is not "Work" or "Private", this can block communication

IP Address change

If the back-end PC is not on a fixed IP address, and the route is set to connect to a specific IP address, then any change will lose the route connection

Ensure the back end is on a fixed IP address (you will need to get an IP address from the customer's IT representative)
or (if customer unable to provide fixed IP address) set the route to NDIS

Then set up the route again from the front end PC

Back end PC Router Needs Clearout

Log in to back end PC and clear all AMS routes out. This cleans out the system and then you can attempt to create the route again


	Step	Pic	Notes
1	Teamviewer to back end PC and clear out existing routes Right click on the TwinCAT3 icon -> Edit routes
2	Remove all existing Routes Click on each one in turn and click remove
3	Restart TwinCAT
4	Log in to the front end PC and set up the route again