Autocut Taking A Backup

Auteur avatarGareth Green | Dernière modification 23/10/2019 par Gareth Green en cours de rédaction

Pas encore d'image

How to backup the data on your Autocut

Difficulté
Très facile
Durée
1 minute(s)

Introduction

Backing up is vital to ensure your data is safe in case there is a failure of the PC or Hard Disk Drive

Étape 1 - Press Backup

Through the winSaw software press '[F11] backup'



Étape 2 - Select Location

You will now be asked where you want the put the backup.

Ideally, this backup should be on a network directory or a USB stick

...If you backup to the C:\drive, all data will be lost if there is a hard drive failure



Étape 3 - Click OK

Commentaires

Draft