Z082 is a ZX5E - No Beam on GX axis - How many links will it need

Z010 - (Oct 2023) output no.394 in conflict - now sorted - see GG note for 425 to 432

Please note : Z094 recently when fitting a new Unit that not all the Parameters above exist Like P275 - Unless it has that module fitted.

Matthew Preston Also reports on Z094 that P265 had to be set at 0 not 20 to work, Also P266 had to be set at 0 not 40 to work. These where the values in the 2 other units that where working

Z055 - ZX4 has been fitted using existing Software setup so Ou_InvDP not used (24v linked to S3 and S4.X308 - Inverter Zero fitted but not used. Uses Drive Run Fwd not using SMOT.

With the Front Air Fitting Being offset at the Nose seal end , it means The Air pipe from the Blue Triangle Cover and the air fitting need to be re positioned or a longer pipe fitted when placed on a Zx5