R0015297 Mount V Notch Datum Rollers

Fitment guide for Datum rollers

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

Introduction

Tools Required

Standard hex key set

Parts Required

R0015038 Bench Assemble V notch Datum Rollers

Étape 1 - Unless otherwise stated

Use locktite 243 on all fasteners

Use loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised

Étape 2 - Mount Mid roller Assembly

Fit mid roller assembly as shown . Do not use adhesive at this stage .

Secure with 2 off M6 x 30 socket caps

Ensure indicated face is butted correctly

Étape 3 - Attach rear frame

Attach frame to rear as shown , secure with 6 off M10 x 30 socket caps and a form washers

Do not use adhesive at this point

Check orientation as shown

Étape 4 - Attach roller assembly

Attach Roller assembly as shown , using 2 off M6 x 50 socket caps and A form washers

Do not use adhesive at this point

en none 0 Draft