R0015253 Fit Slider units

Instructions on mounting slider units to support arms

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

R0015094_Fit_Slider_units_Screenshot_2023-06-13_093021.png

Introduction

Tools Required

Standard spanner set

Parts Required

Pre built Slide units

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Use Loctite 572 on all threaded pneumatic connections

Pen mark all bolts to show finalised

Étape 2 - Fit slider units to Arms

Slide pre built slider units on rails .

1 Ensure drive pinion is slid away from assembly

2 Use setting dokit Setting Delrin Transfer Table Wheel Tension and set delrin wheels to correct tension. Check at all points over oozenest V rail

3 Repeat for all 9 units

en none 0 Draft