R0015140 Spindle energy chains and looms

Installation and routing of control cables and pipes to connection boxes

Difficulté

Medium Moyen

Durée

2 hour(s) heure(s)

Spindle_energy_chains_and_looms_Screenshot_81.png

Étape 1 - Unless otherwise stated

Use Loctite 243 on all fasteners

Pen mark bolts once finalised

Étape 2 - Spindle energy chain assembly

Assembly 8 off spindle energy chains with 27 links of A0000343 and 1 pair of A0000344

Assemble as image

Étape 3 - Mount energy chains

1 Use 4 off m3 x 6 pan head screws and mount energy chains as shown. Ensure energy chain is mounted parallel to the cylinder

2 Disconnect end shown ready for cabling

Étape 4 - Double plunge control routing

1 Use small cable wrap to start loom at cylinder end. Incorporate reed switches as passing. Add tie wrap to secure loom

2 Continue loom and fix to tie bases as passing

3 Continue loom over terminal box and secure on Tie base

4 Place looms as shown through energy chains

5 Reconnect energy chain and leave flying tails in centre of the ring

Repeat for 3 other double spindles

Étape 5 - Single plunge cable routing

Feed motor cable through energy chain and reconnect as shown

Étape 6 -

en none 0 Draft