R0000164 Spindle Disassemble for Required parts

This dokit details the method of disassembly and list of parts that can be salvaged from a faulty R0000164 spindle assembly

Difficulté

Medium Moyen

Durée

1 hour(s) heure(s)

R0000164_Spindle_Disassemble_for_Required_parts_spindle.jpg

Introduction

Obsoletion of main pcb tooling holder shaft has created inability to supply replacement spindle units that have failed on site. This procedure will extract required parts from failed units to provide a supply of parts required to create exchange units for R0000164 spindles

Étape 1 - Remove drive pulley

1. Remove 2 off M6 grubscrew from pulley
2. Remove pulley from shaft

...If pulley is tight to remove, use lever bars to prise pulley off

Étape 2 - Remove Grubscrew

en none 0 Draft