Installation procedure for Autoflow Mk4
Difficulté
Difficile
Durée
3 jour(s)
Sommaire
- 1 Introduction
- 2 Étape 1 - Prepare Area
- 3 Étape 2 - Unload from Transport
- 4 Étape 3 - Locate and level infeed table
- 5 Étape 4 - Locate, level and align machining module
- 6 Étape 5 - Locate, level and align outfeed table
- 7 Étape 6 - Fix to floor
- 8 Étape 7 - Locate waste conveyor system
- 9 Étape 8 - Guard fencing assembly
- 10 Étape 9 - Connect Services
- 11 Commentaires
Introduction
General Procedure is
- Prepare Area
- Unload from Transport
- Locate and level infeed table
- Locate, level and align machining module
- Locate, level and align outfeed table
- Fix to floor
- Locate waste conveyor system
- Guard fencing assembly
Utiliser des chaussures de protection
Étape 1 - Prepare Area
Étape 2 - Unload from Transport
Étape 3 - Locate and level infeed table
Étape 4 - Locate, level and align machining module
Étape 5 - Locate, level and align outfeed table
Étape 6 - Fix to floor
Étape 7 - Locate waste conveyor system
Étape 8 - Guard fencing assembly
Étape 9 - Connect Services
Draft
Français
English
Deutsch
Español
Italiano
Português