Setting Infeed Datum Clamp

Auteur avatarGareth Green | Dernière modification 17/01/2023 par Gareth Green en cours de rédaction

Correct Setup of the Infeed Datum Clamp

Sommaire

Setting Infeed Datum Clamp Screenshot 2023-01-17 094046.jpg


1 Movement range Make sure the Cylinder (P0001110) has a full range of movement up and down
2 Clamp Rubber Pad The clamp should have a rubber pad (M0000253) on the bottom, ensure it is fitted and not worn
3 Locknuts Tight Ensure the cylinder locknuts are fully tightened
4 Clamps Profiles Place a bar in machine,

Run in Setup Mode

Activate Infeed side and top roller clamps

Activate Infeed Datum Clamp

Ensure the bar in the machine cannot be moved easily - you should have to really struggle to pull or push it in to the machining area

Commentaires

Draft