Obsolescence Notice - P0000353 Banjo Flow Regulator

Notes surrounding P0000353 obsolescence

Obsolescence_Notice_-_P0000353_Banjo_Flow_Regulator_P0000353.JPG

Obsolescence Replacement

Part number P0000353 is obsolete. This is an original part used on sawing centre cylinders for speed control on cylinders with a 1/8" BSP port and 6mm air push fitting

It has been generally replaced with P0001049 which is a more compact version. This is preferred becasue

• The adjustment is fixed and does not drift on its own
• It does not need locking off
• It less susceptible to damage

P0001049

Saw Eject Cylinder

There is an issue with the use of this fitting on the saw eject cylinder. The fitting is too compact and would not give enough room for entry for the pipe. This is solved using a P0000368 extension.

en none 0

Draft