Full Version Upgrade TwinCAT3 WinMulti

Auteur avatarGareth Green | Dernière modification 12/09/2022 par Gareth Green en cours de rédaction

Pas encore d'image

Introduction

If a PC fails on a machine in the field and the hard drive data cannot be recovered, it is necessary to replace the PC. This may create a version conflict, as the new PC will have later versions of twinCAT installed than the original


This tutorial outlines the steps required to bring all the machine systems up to the latest level to ensure compatibility


...This is a one-way process that cannot be reversed

Étape 1 - Set up replacement PC from Scratch

Create a TwinCAT Project from Scratch

This procedure ensures that the front end PC has the latest TwinCAT version, and that the PLC source control program is correctly integrated, meaning the latest PLC code version will be available

Étape 2 - Copy latest front end (winmulti) software

Latest version of winMulti software is located at

G:\builds\Latest Software Versions\winmultiv6


...Copy the entire folder contents

Étape 3 - Install back end latest version

Updating Beckhoff TwinCAT3 Backend Version

This ensures the back end PLC is on the latest TwinCAT version

Étape 4 - TwinSAFE

Étape 5 - Update Control Systems Log Board

https://stugaltd.monday.com/boards/304269981

  • Date
  • Front End Version
  • Back End Version
  • Version Control Type

Commentaires

Draft