YNotchStartGap Parameter

Auteur avatarGareth Green | Dernière modification 2/09/2022 par Gareth Green en cours de rédaction

Pas encore d'image

Definition and use of the yNotchStartGap parmeter

Problem

Applies to machines with V notching on the ring - worse if the blade size is 200mm

If a Y notch is at the very start of the bar, there is a combination of the gripper location inside the ring with the Y and Z axes in an extrreme position. This leads to a clash between the gripper and the ring.

Solution

From software version 4.65.0.0 a new parameter exists for

Commentaires

Draft