Correct Adjustment of Saw Anaconda Rotation

How to correctly Adjust the Saw conduit to prevent it hitting the guard locking device

Difficulté

Easy Facile

Durée

5 minute(s) minute(s)

Adjustment, Anaconduit Correct_Adjustment_of_Saw_Anaconda_Rotation_Screenshot_2022-08-22_114034.jpg

Introduction

How to correctly Adjust the Saw conduit to prevent it hitting the guard locking device

Vimeo

Étape 1 - INCORRECT

This picture shows the conduit with a bias forwards, which will be a problem

Étape 2 - Adjust the lower rotation Nut

1. Ensure that the conduit is twisted / biased back
2. Ensure it misses the guard locking device when manually rotated
3. Lock off the locknuts in this biassed position

Étape 3 - CORRECT

Conduit is biassed to the rear

en none 0 Draft