Diagnosing EtherCAT Issues - Advanced

Hoe to trace TwinCAT3 EtherCAT issues using the System Manager Advanced features

Difficulté

Hard Difficile

Durée

10 minute(s) minute(s)

TwinCAT3, EtherCAT, Fault, Network

Introduction

There are many tools available to help trace EtherCAT faults. This document describes some more advanced features that can help pinpoint an intermittent or hard to find issue. You will need a good working knowledge of the machine and the basis of EtherCAT networking

Étape 1 - Show Online Topology

This switches on a graphical view of the EtherCAT network and can help identify problems

1. Select Topology view for the Device you want to interrogate
2. This opens the offline view - the view of how the setup expects the network to look
3. Select Online->Show Topology
4. Hover around the topology to display any messages

In this case, the red dots show problems, the dot shown shows that there are 69 CRC errors on this node - this means the network link has been broken at this point 69 times since you connected to it. (Probably a loose connection)

Étape 2 - Set Up Advance CRC Checking

1. Choose the device network to interrogate and press the Advanced button
2. Expand to the Diagnostics-Online View and select the CRC checks 0300-0304 and Link Lost 0310-0312. Click ok to exit
3. On the online view, the system now records more detail about the CRC errors or link lost problems.

In the case in the pictures, FB015B has recorded 69 errors on issue 0310 , which is "Link Lost A/B". There are CRC errors on the output of FB016B and the input of FB015B. This tells me that the link between FB016B and FB015B is not reliable. Could be a loose connection on the etherCAT and / or power cable

Étape 3 - TwinSAFE problems

If this is a twinSAFE system uses the yellow slices), and etherCAST issue will lead to an Estop problem. See Diagnosing TwinSAFE Issues - Advanced for help in diagnosing these issues

en none 0 Draft