Input Definition 013 to 020 - InA PosnOn

Input Definition 013 to 020 - InA_Pos0On to InA_Pos7On

InA_Pos, X013 Input_Definition_013_to_020_-_InA_PosnOn_Autoflow_Infeed_Pos_Sensors.jpg

Back To Stuga Machine IO Dictionary - Inputs

Input Definition

Reference	013-020
Type	Input
Code	InA_Pos0On, InA_Pos1On, InA_Pos2On , InA_Pos3On , InA_Pos4On , InA_Pos5On , InA_Pos6On , InA_Pos7On
Description	Infeed flap activated
Used On	Autoflow, ZX5 Mk1
Function	Detects position of flap on the arm of a pop-up infeed table. Position 0 is closest to the backfence ...This numbering is used to future proof the design in case a wider infeed is required with more infeed slots
Sensor Type	Proximity Sensor
Adjustment	Adjust distance to detected surface - should be <1mm
See Also

...If this sensor fails, it can very easily be swapped with sensor an "off" sensor, as they are not used. This was an experiment with the design to ensure a sensor is fully "on" to minimise failures, but it was not reliable

en none 0

Draft