Dark windows profiles were sometimes not picked up by the photoelectric sensors, resulting in incorrect length measurements, and errors on the machine.
Technical Bulletin
| TB Number: | 315 |
| Originator: | Max Hamlet |
| Machine: | Autoflow |
| Date: | 11/08/16 |
| Circulate to: | Stuga Service Engineers |
| Title: | Fitting Autoflow Dark Profile Sensor |
Problem
Dark windows profiles were sometimes not picked up by the photoelectric sensors, resulting in incorrect length measurements, and errors on the machine.
Solution
The installation of a new sensor and bracket overcomes this issue. The new sensor detects dark profiles much more reliably. The bracket uses the same mounting bolts as the old set up.
Required Parts
| Part Number | Description | Quantity |
| D0010878 | Bracket Base: Laser Sensor | 1 |
| D0010879 | Bracket Mount: Laser Sensor | 2 |
| E0001064 | Connector: Field Attachable, M8 3 wire, Male IDC | 1 |
| E0001175 | Sensor: Laser Distance 300mm M12 5 Pin | 1 |
| E0001179 | Connector M12 5 wire female straight PVC 1m | 1 |
| F0000006 | M5 x 10 Caphead Screw S/S | 4 |
Fit the sensor and bracket shown in the 2 images. The cable should run out of the top of the brackets, which gives protection to the cable plug. Connection is then made to the etherCAT box as per the previous sensor.
Draft
Français
English
Deutsch
Español
Italiano
Português