External Factors that can affect accuracy on Stuga Machines
Sommaire
There are many external factors that can affect the accuracy of Stuga machines. it is incredibly important that these factors are all eliminated as potential root causes.
If you do suspect that one of these factors is potentially a problem, it is equally important to be able to prove and demonstrate your suspicions clearly.
| External Factor | Description | Link to Page |
| Temperature change | If the profile changes in temperature | |
| Profile Width | ||
| Innaccurate welders | ||
| Incorrect link data (Y notch codes) | ||
| Profile synmmetry | ||
| Wet profile | ||
| Profile left on TT overnight | ||
| Bowed profile | ||
| Twisted profile | ||
| Parallelism of profile faces | ||
| Cleanliness | ||
| Blades / tooling | ||
| Tolerances (+/- 0.5mm) | ||
| Customer expectation | ||
| Blade buckled / missing teeth | ||
| Incorrect pos test fiddling | ||
| Proper operator trained | ||
| Laser lens | ||
| Rear of saw - clean | ||
| Blunt saw blade | ||
| Skipping the laser |
Draft
Français
English
Deutsch
Español
Italiano
Português