TB0420 Obsolescence Note - Flowline Spindle Motors

Auteur avatarGareth Green | Dernière modification 2/03/2020 par Gareth Green en cours de rédaction

The original motor is no longer available, and a replacement has proved impossible to find due to the physical size of the motor

Parts Affected

TB0420 Obsolescence Note - Flowline Spindle Motors Image.png

The original motor is no longer available, and a replacement has proved impossible to find due to the physical size of the motor.

The design constrains the frame size, and requires two modifications


1.      Fins on the motor need to be machined off to prevent the motor casing hitting the infeed clamps


2.      The motor electrical connection box needs to sit in the correct orientation and be physically low enough to pass underneath the spindle connection

box. A modified lid was fitted to allow this to happen


All replacements considered cannot meet these physical constraints, particularly the connection box issue.

Stuga have a small stock of second-hand motors. The recommendation is to get the motors rewound locally to the customer site – Stuga are unable to offer this service.


TB0420 Obsolescence Note - Flowline Spindle Motors Image1.png


Part Nos Description
D0008252 Std Hand
D0007342 Opp Hand
E0000219 Original Motor 71/B14 2 Pole 0.75kW
TB0420 Obsolescence Note - Flowline Spindle Motors Image2.png

Commentaires

Draft