Autocut Taking A Backup

How to backup the data on your Autocut

Difficulté

Very easy Très facile

Durée

1 minute(s) minute(s)

Introduction

Backing up is vital to ensure your data is safe in case there is a failure of the PC or Hard Disk Drive

Étape 1 - Press Backup

Through the winSaw software press '[F11] backup'

Étape 2 - Select Location

You will now be asked where you want the put the backup.

Ideally, this backup should be on a network directory or a USB stick

...If you backup to the C:\drive, all data will be lost if there is a hard drive failure

Étape 3 - Click OK

en none 0 Draft