How to mechanically set the V notches on a ZX5.
Difficulté
Facile
Durée
30 minute(s)
Introduction
On previous models the V notch separation was set via the software. This could be quite time consuming and required a set of tests to get it right.
On the new ZX5 the searation is set mechanically and once set it should never need changed again, but remember that some customers sharpen their V notch blades instead of replacing them.- Pièces et outils
Pièces et outils
[[Item:|]] A fatal error occurred in the #info parser function
Étape 1 - Carry out first V notch test
This step isn't really required, I personally like to do it just to see how far out we are to start with
Draft
Français
English
Deutsch
Español
Italiano
Português