Client Installation of Sage and Cim50

Procedure on how to install Sage50 and Cim50 to a client device

Difficulté

Easy Facile

Durée

60 minute(s) minute(s)

Introduction

This is a step by step guide on how to install Sage50 and Cim50 to a client device

Sage must be installed first in order for the link to Cim50 to work as intended

Étape 1 - Get signed in

Sign in to the machine with any domain account

Étape 2 - Access the share on the server

Navigate to \\mainserver\Cim50\Updates

Étape 3 - Locate and run the correct version of Sage

Right-click and "Run as administrator" the current version of Sage (Currently SageAccounts_28.0.226.0)

Étape 4 - Installation Process (Sage)

• Accept Licence -> Next
• Select Standard, Yes begin installation.
• May be ask to Update to 28.1 – say yes then begin installation.
• Close installation
• Open Sage
• Add company
• Connect  \\mainserver\sage\company.001 next
• Next on the activation screen.
• Get confirmation then select connect
• Login with credentials to confirm all works

Étape 5 - Access Cim50 Installer Folder on the server

Navigate to \\mainserver\Cim50\Updates

• Select Current version folder "Cim50 v2022 Installer"

Étape 6 - Locate and run the correct version of Cim50

Right-click and "Run as administrator" the current version of Cim50

• This needs to be a local administrator and not the Domain Admin

Étape 7 - Installation Process (Cim50)

• Next on the first screen
  • This may ask to install prerequisites (SAP Crystal Reports)
  • Click next through all of this, accept any license agreements.
• Once the prerequisites have been installed, Accept the agreement -> Next
• Leave file path -> Next
• Select Client Install -> Next -> Install
• You may get some "Publish verification" requests, Allow each one.
• Finish (do not Launch Cim50 from this screen)

Étape 8 - Cim50 Configuration Setup

• Open Cim50 Control Panel
• Select Client Setup
• Add the system drive as \\mainserver\cim50  -> continue
  • You will need to press TAB to get to the button
• Complete any updates.
• If the user is going to use SHOPFLOOR data you will need to launch and put the same path in \\mainserver\cim50

en none 0 Draft