Service Engineer Tricks and Tips

Specialised knowledge for Stuga and Stuertz Machines

Opening Cabinet Door With Power On

The Rittal range of cabinets have a secret hole for opening the door when power is still on the machine. Insert a thin, cylindrical object to unlock the door

...This will expose live terminals so extreme caution should be exercised and only used when necessary. Do not demonstrate this to a customer

Interlock Override Hole	Example Insert Tool (Bend is optional)

Override Air Pressure Release

...This will override the safety feature of the air dump when the doors are opened, so ensure this adjustment is reversed when complete

The Air service Unit has an air bleed screw which is used to control the air flow rate.

If this is tightened fully clockwise, the air is not dumped and allows the clamps to remain open during a service

Electrically Override Guard Circuit

...This is a serious intervention in the Safety circuit so extra care should be taken. Make sure that machine is left in a safe condition

Override Wires

Machine	Link
ZX4, ZX3 and Microline	102 to 105 in main cabinet

Password Override

Customers sometimes forget the passwords or the owner of the passwords are not around when you need them

System	Password Location
Flowops database	In a file called settings.pwl located in the same folder as the flowops program (varies on machine setup)
winMulti Supervisor	In params.saw, parameter "password"
winMulti Remakes	In params.saw, parameter "remakesPassword". Only on software v6.3.61.0 onwards See WinMulti - Remakes#Setting up a Password for Remakes

en none 0

Draft