Obsolescence notes for Lenze Motors
B0000350 ZX / Microline Infeed Table (2007 onwards)
A replacement has been sourced for the Lenze Motor used in this location on the 2007 version of the infeed table (Box section), which requires a new bracket to offset the difference in the foot mounting holes.
Order code R0019103
Image shows motor mounted with D0001272C, as part of R0019103.
B0000350 ZX / Microline Infeed Table (pre - 2007)
A replacement has been sourced for the Lenze Motor used in this location on the pre-2007 version of the infeed table (Tube section), which requires 2 new brackets to clamp around the tube.
Order code R0019103
.png)
Saw Conveyor Motor
Use R0019083 Upgrade: Conveyor Motor
This uses the standard conveyor motor B0001013 which is also used on Autoflow Conveyors with a bracket to allow fitting
See Upgrade - R0000173 Conveyor Motor
Ecoline Conveyor Motor
Use R0019163 Upgrade: Ecoline Conveyor Motor
This uses the standard conveyor motor B0001013 which is also used on Autoflow Conveyors
Draft
Français
English
Deutsch
Español
Italiano
Português