R0015321 Bench Assemble Guards and Doors

Bench assembly details for guards and doors

Difficulté

Medium Moyen

Durée

5 hour(s) heure(s)

R0015321_Bench_Assemble_Guards_and_Doors_Screenshot_2023-11-01_175538.png

Introduction

Tools Required

Standard hex key set

Standard spanner set

Dymo label printer

Parts Required

C0001152 Camera: HikVision DS-2CD2343G0-I-2.8mm x 3

C0001239 Micro SD Card 32Gb Class 10 x 3

D0007643B Perspex Glazing - Door x 4

D0007644B Machining Centre Door 1 x 2

D0007645B Machining Centre Door 2 x 2

D0007654B Perspex Glazing - Front Guard MkB x 1

H0015747 8mm diameter rod x 1 ( in process of changing to D0015747 x 4 )

M0000036 Sign - Ear Protection x 1

M0000201 T Handle Cabinet Lock x 2

Étape 1 - Unless otherwise stated

Use locktite 243 on all fasteners

Use loctite 572 on all threaded pneumatic connection

Pen mark all fasteners to show finalised

Étape 2 - Roof Panel fit light

Fit Pre assembled lights to roof panel

Ensure nyloc nuts are used to back of fixings on light assemblies

Fit cable tie bases

Attach Cables from lights to tie bases

Étape 3 - Roof panel fit beacon

  Fit Beacon assembly to roof

Étape 4 - Roof panel fit Stuga sticker

Fit Large clear stuga sticker to top face of roof

fit central and facing infeed

Étape 5 - Front Panel Upper Fit screen

Fit screen to front panel

Étape 6 - Front Panel Upper fit camera

Fit C0001239 Micro SD Card 32Gb Class 10 x 1 to camera before mounting

Fit camera to top guard using 3 off M4 x 12 socket caps , and back off with M4 dome nuts and M4 A form washers

Ensure camera is fitted the correct orientation. Camera will have a 'UP' marked on body. This must be at the top

Camera must be fitted to top corner of front guard closest to Module F saw unit

Étape 7 - Front Panel upper Fit Sticker

Fit small clear Stuga sticker to front panel

Étape 8 - Rear Upper Panel Fit Camera

Fit C0001239 Micro SD Card 32Gb Class 10 x 1 to camera before mounting

Fit camera to rear panel using 3 off M4 x 12 socket caps , and back off with M4 dome nuts and M4 A form washers

Ensure camera is fitted the correct orientation. Camera will have a 'UP' marked on body. This must be at the top

Étape 9 - Rear upper Panel Fit sticker

Fit large Clear Stuga sticker

Étape 10 - Door Assembly Fit screens

Fit screens to doors

Étape 11 - Door assembly Fit Handles

Fit door handles to doors

Étape 12 - Door Assembly Fit locking pins

Fit locking pins to doors

Étape 13 - Door Assembly Fit stickers

en none 0 Draft