R0015085 Mount SR Datum Sensor and Flag

Mounting details for SR axis flag and sensor

Difficulté

Medium Moyen

Durée

0.25 hour(s) heure(s)

R0015085_Mount_SR_Datum_Sensor_and_Flag_Screenshot_2023-10-20_075214.png

Introduction

Tools Required

Standard Hex key set

Standard spanner set

Parts required

D0015489 Saw Turntable Sensor Bar x 1

E0000336 Sensor: M8; 2mm, PNP N/O, M8 conn x 1

M0001165 U bolt 3nb M12 BZP x 1

Étape 1 - Unless otherwise stated

All bolts to have Loctite 243 adhesive applied unless otherwise stated

All Threaded Pneumatic connections to have Loctite 570 applied

All bolts to be pen marked once adhesive applied and correct tension added

Étape 2 - Attach sensor bracket

Attach u bolt and sensor bracket on infeed mounting pillar

Fix with M12 nuts and M12 A form washers

Étape 3 - Fit sensor

Fit E0000336 sensor to assembly

Étape 4 - Set height

Set Height of U bolt bracket assembly in relation to flag on saw motor plate

Étape 5 - Set sensor height

Set sensor height to minimal clearance (-1mm )

Check gap is consistent on full travel over sensor flag when head is rotated

Étape 6 - Finalise

Finalise M12 nuts and ensure U bolt assembly is mounted true as to not impact on side sheet guarding panel when fitted later

en none 0 Draft