Upgrade ZX Machine to Beckhoff Drives and Control

This tutorial will provide a step by step guide on how to upgrade a ZX style machine to have Beckhoff drives and control system.

Difficulté

Very hard Très difficile

Durée

5 day(s) jour(s)

Upgrade, Beckhoff, ZX3, ZX4, Control System Upgrade_ZX_Machine_to_Beckhoff_Drives_and_Control_ZX4.JPG

Introduction

The ZX3 and ZX4 machines that have control systems that pre-date the Beckhoff hardware now have an upgrade available. The upgrade will bring up-to-date hardware to the machines control system and drives. The control system and drives will be changed to Beckhoff. TwinCAT 3 PLC and AX8000 series drives.

Attention

Consulter le manuel d'instructions

Utiliser des chaussures de protection

Pour l'entretien, débranchez l'appareil du secteur

Avertissement générique

Haute Tension

Étape 1 - Preparation (Base)

Étape 2 - First Fix Servo Cabinet

Étape 3 - Preperation (On-Site)

Étape 4 - Remove Components - MH (Electrical)

Étape 5 - Remove Components - Saw (Electrical)

Étape 6 - Remove Components - Saw Infeed (Electrical

Étape 7 - Remove Components - Field Components

Touchscreens

Cabling

Étape 8 - Fit Parts - MH (Electrical)

Étape 9 - Fit Parts - Saw (Electrical)

Étape 10 - Fit Parts - Transfer (Electrical)

Étape 11 - Fit Servo Cabinet

Étape 12 - Wiring Cabinets

Refer to drawings

Étape 13 - Run Machine Cabling

Étape 14 - Upgrade Console - MH

Étape 15 - Upgrade Console - Saw

Étape 16 - Terminate Machine Wiring

Étape 17 - Tidying and Checks

en none 0 Draft