Assembly details for 1st stage fitting
Auteur Gareth Green | Dernière modification 10/01/2024 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽
Assembly details for 1st stage fitting
R0015272_1st_Stage_fitting_Saw_Outfeed_Screenshot_2023-08-30_115613.png
Tools Required
Standard Hex key set
Standard HSS Drill Set
Standard spanner set
Standard Tap set
Standard 5mm straight hex key ( non ball point )
Hex key extension bar
Parts Required
D0004583 Outfeed Long Rest (5354) x 1
D0004584 Outfeed Side Rest x 4
D0005127 Outfeed Welded Frame (5356) x 1
H0005136 Outfeed Top Tray (5355) x 1
Use Loctite 243 on all fasteners
Use Loctite 570 on all threaded pneumatic connections
Pen mark all bolts when finalised
Use taps to clean all threads present on frame .
Add 4 off m12 x 100 set bolts with M12 nuts and fit to adjusting points
Use 4 off levelling pads (workshop stock ) to sit beneath adjustment bolts
(pictures required please)
Ecr raised 10/10/23 to add 2 off M4 tapped holes to frame.
Until processed add by hand as shown
Fit D0004583 Outfeed Long Rest orientated as shown
Tap all holes in long rest before fitting . Only use a plug tap to clean threads in long rest
1 Use 4 off M6 x 12 socket caps with M6 A washers and fix to frame
2 Check flatness with 2 meter straight edge across 2 indicated points.
Straight edge will show a gap in the centre section of the long rest bar
Shims can be used to adjust the flatness of the long rest plate
Cut shims to 10mm x 140mm
Place at indicated points between frame and long rest bar .
Re tension bolts once shim is added to show true reflection of change made by shim added
Adjust until long rest bar is flat to straight edge
Tolerance + - 1mm
Fit H0005136 Outfeed Top Tray as shown
Ensure indicated faces are set flush to frame
Use 8 off M6 x 12 socket caps and heavy M6 washers to fix to frame
Fit 4 of D0004584 Outfeed Side Rest to positions indicated
When fitting side rests ensure that they are set as shown S
1 Use M6 x 10 socket caps (4 off) to fit indicated arms to frame
2 Use M6 x 12 socket caps and penny washers (4 off) to fit indicated side rests
en none 0 Draft
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #