[version en cours de rédaction] | [version en cours de rédaction] |
Ligne 3 : | Ligne 3 : | ||
}} | }} | ||
<translate> | <translate> | ||
+ | {| class="wikitable" | ||
+ | |+External Factors | ||
+ | !Check | ||
+ | !Description | ||
+ | !Symptoms | ||
+ | !What to do | ||
+ | |- | ||
+ | |Temperature Changes | ||
+ | |Is it winter and the profile stored outside and loaded directly on the machine? | ||
+ | |||
+ | Has pr | ||
+ | |Position of operations on pieces. | ||
+ | Seemingly random but will be worse on first pieces off the saw. | ||
+ | |A bar of plastic will expand by 12mm in length with a 10 degree change in temperature. | ||
+ | Try your machine with profile that has been indoors and is the same temperature as the machine environment | ||
+ | |- | ||
+ | |Profile Width | ||
+ | |Check the profile width with a Vernier gauge - is it the width it is supposed to be | ||
+ | See [[Z Transom Width Measurement]] for measuring Z Transom Width | ||
+ | |V and Y notch Depth | ||
+ | Arrow Head Position | ||
+ | |Adjust the profile width in the settings - this will adjust the depth of V and Y notches to match the profile width{{Warning|...be sure to reset it once the problem profile is used up}}<br /> | ||
+ | |- | ||
+ | |Profile Symmetry | ||
+ | |T and Z profiles are not extruded symmetrically | ||
+ | |Arrow Head Position poor on one profile but not on others | ||
+ | |Check symmetry of profile carefully . | ||
+ | See [[TM016 Arrow Head Adjustment on Saw]] for further details | ||
+ | |- | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |} | ||
Basic Checks that an operator can carry out as a first level identification of accuracy issues
Auteur Gareth Green | Dernière modification 10/08/2023 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽
Pas encore d'image
Basic Checks that an operator can carry out as a first level identification of accuracy issues
Check | Description | Symptoms | What to do |
---|---|---|---|
Temperature Changes | Is it winter and the profile stored outside and loaded directly on the machine?
|
Position of operations on pieces.
Seemingly random but will be worse on first pieces off the saw. |
A bar of plastic will expand by 12mm in length with a 10 degree change in temperature.
Try your machine with profile that has been indoors and is the same temperature as the machine environment |
Profile Width | Check the profile width with a Vernier gauge - is it the width it is supposed to be
See Z Transom Width Measurement for measuring Z Transom Width |
V and Y notch Depth
Arrow Head Position |
Adjust the profile width in the settings - this will adjust the depth of V and Y notches to match the profile width ...be sure to reset it once the problem profile is used up
|
Profile Symmetry | T and Z profiles are not extruded symmetrically | Arrow Head Position poor on one profile but not on others | Check symmetry of profile carefully .
See TM016 Arrow Head Adjustment on Saw for further details |
For advanced checks please click here
en
none
0
Draft
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #