Changing Version Control to Visual Studio

How to change the version control software from Sourcetree to the inherent system on Visual Studio

Difficulté

Hard Difficile

Durée

1 hour(s) heure(s)

Visual Studio, Source, Version TcAeShell_Icons.jpg

Introduction

In March 2022 the password policy of the system behind SourceTree / Bitbucket and Atlassian changed - link. This meant all machine would need a complex password login change for the SourceTree program used for version control of the PLC code.

This was not straight-forward to resolve, so the decision was made to change the version control system to the one that is packaged with the Visual Studio system by default. This is a better method anyway, but it needs the "TcXaeShell" installed.

...The TcXaeShell is simply a newer version of Visual Studio that includes Source control, rebadged for TwinCAT3

Étape 1 - Take a backup of the current build project

Étape 2 - Backup the Mappings information

Étape 3 - Ensure TcXAEShell is installed

1. Right click on TwinCAT service in the task bar
2. If TcXaeShell is installed you will see the gold Icon with the cog inside

There is a Visual Studio icon here instead, you will need to install TcXaeShell.

Procedure is here

Étape 4 - Open TwinCAT Shell

Étape 5 - Open the Machine Solution File

Étape 6 - Create the Repository

1. Open Team Explorer
2. Clone a new Git Repository
3. URL to clone: https://bitbucket.org/StugaMachinery/tc3Multi
4. Click on the destination setup
5. Create a new folder under the machine build folder called "source"
6. Click 'Clone'

Étape 7 - Enter Git Credentials (if required)

Atlassian Username is StugaMachinery

Password is stored in the file

G:\IT Department\SourceTree BitBucket App Password.txt

Étape 8 - Move The PLC_Reset and tc3Multi Project

1. Right click the PLC_Reset Project
2. Select Change Project
3. Navigate to the repository you have created in Step 4 c:\TwinCAT\Stuga\BuildNo\source\PLC_Reset\PLC_Reset.plcproj
4. Repeat for the tc3Multi project

Étape 9 - Delete the versionControl Folder

Delete the versionControl folder completely

...This prevents confusion in the future of where the project exists

Étape 10 - Update Control Systems Log

Update the Version Control column on the board to "VisualStudio" to log the completion of this task

en none 0 Draft