Z010 - (Oct 2023) output no.394 in conflict - now sorted - see GG note for 425 to 432

Please note : Z094 recently when fitting a new Unit that not all the Parameters above exist Like P275 - Unless it has that module fitted.

Matthew Preston Also reports on Z094 that P265 had to be set at 0 not 20 to work, Also P266 had to be set at 0 not 40 to work. These where the values in the 2 other units that where working

Z108 - Has been updated

STO alarm Please see https://stuga.dokit.app/wiki/Yaskawa_Inverter_-_Fault_and_Alarm_Output_Functionality Once wiring changes have been made, change parameter H2-03 to 110. This can be done online via DriveWizard or directly through the inverter touchpad.

Z055 - ZX4 has been fitted using existing Software setup so Ou_InvDP not used (24v linked to S3 and S4.X308 - Inverter Zero fitted but not used. Uses Drive Run Fwd not using SMOT.

Z082 is a ZX5E - No Beam on GX axis - How many links will it need

A2032 and A2033 require different Positions

Once wiring changes have been made, change parameter H2-03 to 110. This can be done online via DriveWizard or directly through the inverter touchpad.