B0000025 B0001175 Belt Identification : Différence entre versions

[version en cours de rédaction]

Version du 6 février 2025 à 17:28

Guide to correct identification of appropriate Saw blade motor drive belts

Difficulté

Facile

Durée

5 minute(s)

Guide to correct identification of appropriate Saw blade motor drive belts

Difficulté

Facile

Durée

5 minute(s)

Saw, Blade, belts, Motor, pulley

A Guide to correctly identify the variant of drive belt required for ZX5, ZX4 ,ZX3 S-65 and Flowline saw modules

Belts will vary across blade sizes and Pully diameters

Key indicator is pulley size, over blade size

Pulley size must be measured to determine the correct belt size for the machine

There are 2 sizes of pulley that may be fitted

A tape measure will be adequate for taking a measurement

Simply use the tape measure to take measurement over the indicated area, don't be too fussy, as the difference in pulley sizes is very noticeable

Measure the 2 indicated pulleys

Use your measurements below to calculate the correct Stuga Part number required for replacement belts

en none 0 Draft

@@ Ligne 50 : / Ligne 50 : @@
+{| class="wikitable"
+|+
-IF 1 pulley measures around '''84mm( 8.4cm )'''  and the other pulley measures around '''104mm (10.4cm),'''  the machine will require  '''B0000025''' drive belts
+!Pulley 1 Dia
+!Pulley 2 Dia
+!Part Number
+|-
-If both pulleys measure the same at around '''84mm (8.4cm)''' , then the machine will require '''B0001175''' drive belts
+|104mm
+|84mm
+|B0000025
-If your pulleys both measure around '''104mm (10.4cm)''', Please raise this with our technical team immediately</translate>
+|-
+|84mm
+|84mm
+|B0001175
+|-
+|104mm
+|104mm
+|Contact Stuga
+|}</translate>
 |Step_Picture_00=Saw_Motor_Drive_Belt_Identification_Guide_Screenshot_2025-02-06_141402.png
 }}