Setting Ultrasonic Sensor - Horizontal

Setting an ultrasonic sensor mounted horizontally

Difficulté

Easy Facile

Durée

5 minute(s) minute(s)

ultrasonic, ecoline, setting, infeed Setting_Ultrasonic_Sensor_-_Horizontal_IMG_1313.jpg

Introduction

This involves setting a "window" for a minimum and maximum range when mounted horizontally

Vimeo

Étape 1 - Ensure there is 30mm clearance from sensor to profile

The sensor will not work unless there is 30mm clearance to minimum position

Étape 2 - Place Profile at minimum position

Usually with profile against backfence

Étape 3 - Press and hold button until lights flash

Around 3 seconds

Étape 4 - Place profile at maximum position

On an Ecoline, around 60mm

Étape 5 - Press and hold until lights stop flashing

Étape 6 - Test with profile

Ensure it turns off and on in the set window

en none 0 Draft